Growth Temperature Research Articles

Broad band modulation of two-dimensional Mo1-x W x S2 by variational compositions

Precisely tuning bandgap enables tailored design of materials, which is of crucial importance for optoelectronic devices. Towards this end, ternary Mo1-x W x S2 monolayers with continually variational transition metal compositions are synthesized by precisely control of the precursors and growth temperatures in the chemical vapor deposition process, and thus to manipulate the bandgap of the monolayers. Energy dispersive x-ray spectroscopy demonstrates that the composition of the ternary Mo1-x W x S2 monolayers can be effectively modulated by the precursors and synthesizing temperatures. Frequency and intensity of the Raman and photoluminescent peaks of the Mo1-x W x S2 monolayers are continually modulated by the variational Mo and W compositions. The maximum of 0.148 eV bandgap modulation is achieved by modulating the transition metal compositions, which is highly consistent to the calculated 0.158 eV by first-principles theory. Photodetectors based on the Mo1-x W x S2 monolayers are fabricated and U-shape of photoresponse characteristics are demonstrated as x change from 0 to 1 under the same measurement conditions. The estimated photocurrent, photoresponsivity and external quantum efficiency show that the minimum values appear at the composition of x = 0.5, while the maximum values appear at x = 1. The results illustrate an excellent level of control on the band structure of two-dimensional ternary Mo1-x W x S2 by precisely control of the transition metal compositions.

Effects of water temperature on growth of invasive Myriophyllum aquaticum species

This study sought to investigate the invasive mechanism of Myriophyllum aquaticum by subjecting it to simulation experiments in varying water temperatures ranging from 0 °C to 30 °C. The results showed that water temperature considerably affected both the growth and reproduction of M. aquaticum. The optimal temperature range for the growth of M. aquaticum was 25‒30 °C. Although the growth of M. aquaticum was inhibited at temperatures between 0‒5 °C, this did not result in mortality. The stem nodes, branches, and diameter reached maximum values over a temperature range of 20‒25 °C. High-temperature stress at 30 °C led to a gradual decrease or disappearance of branches. Compared to the 0 °C, 5 °C, and 30 °C treatment groups, a temperature of 20 °C led to biomass accumulation and significantly higher values. M. aquaticum’s physiological activities were affected by temperature. Except for 10 °C and 15 °C, the catalase activity varied among different water temperatures. M. aquaticum catalase activity was maximal at 5 °C and minimal at 25 °C. Conversely, the synthesis of photosynthetic pigments was highest at 10 °C and 15 °C. The plant’s optimal temperature for growth was between 20 °C and 25 °C. When the temperature was <10 °C, M. aquaticum adapted to the water temperature’s potential damage. This plant has a notable ability to tolerate various temperatures.

Chain branching during the polycondensation of isophthalic aldehyde and 1,1′‐diacetylferrocene by the Claisen–Schmidt reaction

AbstractN‐methyl‐2‐pyrrolidone‐soluble ferrocene‐containing polychalcones, which are promising as a platform for the formation of ferromagnetic coatings after pyrolysis in an inert atmosphere is synthesized through the polycondensation of isophthalic aldehyde and 1,1′‐diacetylferrocene by the Claisen–Schmidt reaction. The structure and the molecular weight distribution of the polychalcones is characterized by NMR, IR spectroscopy, and size exclusion chromatography. It is shown that the formation of polychalcones is accompanied by chain branching via the Michael reactions and the aldol‐croton condensation. The structure of the linear fragments of the polychalcone chains is simulated with a tailored low‐molecular model compound, that is 1,3‐bis(3‐ferrocenyl‐1‐propen‐2‐one)benzene, which is characterized by the NMR and IR spectroscopy as well as the X‐ray diffraction analysis. The obtained results indicate an increasing tendency for polychalcone chain branching with the temperature growth during the Claisen–Schmidt reaction. The weight loss and the increase in magnetization under the conditions of pyrolysis of polychalcones at different temperatures is studied. The assumptions regarding the possible mechanisms of thermal destruction of ferrocene‐containing macromolecules are put forward.

Taxonomic characterization of Sphaerotilus microaerophilus sp. nov., a sheath-forming microaerophilic bacterium of activated sludge origin

A microaerophilic Gram-stain-negative bacilliform bacterial strain, FB-5 T, was isolated from activated sludge in Yokohama, Japan, that exhibited filamentous growth and formed a microtube (sheath). Cells were motile using a single polar flagellum. The optimum growth temperature and pH were 30 °C and 7.5, respectively. Strain FB-5 T was catalase-negative. Peptides and amino acids were utilized as energy and carbon sources. Sugars and organic acids were not utilized. Vitamin B12 enhanced the growth of strain FB-5 T. Sulfur-dependent lithotrophic growth was possible. Major respiratory quinone was UQ-8. Major fatty acids were C16:1ω7 and C16:0. The genomic DNA G + C content was 69.16%. Phylogenetic analysis of the 16S rRNA gene suggested that strain FB-5 T belongs to the genus Sphaerotilus. The close relatives were S. natans subsup. sulfidivorans and S. natans subsup. natans with 98.0% and 97.8% similarity based on the 16S rRNA gene analysis, respectively. The genome size (6.06 Mbp) was larger than that (4.39–5.07 Mbp) of the Sphaerotilus strains. The AAI values against the related strains ranged from 71.0 to 72.5%. The range of ANI values was 81.7 − 82.5%. In addition to these distinguishable features of the genome, the core genome and dDDH analyses suggested that this strain is a novel member of the genus Sphaerotilus. Based on its physiological properties and genomic features, strain FB-5 T is considered as a novel species of the genus Sphaerotilus, for which the name S. microaerophilus sp. nov. is proposed. The type strain is FB-5 T (= JCM 35424 T = KACC 23146 T).

Energy Compensation for Crop Growth under Plastic Mulching: Theories, Models, and Limitations

Plastic film mulching (PM) is a useful agronomic means to adapt to the environmental conditions of dryland agriculture and improve crop production. To improve the theoretical framework of PM technology, this study focuses on the interaction between the soil temperature change caused by PM and crop growth. The definition, action mechanism, and simulation of the compensatory effect of PM on growing degree days are introduced to reveal the effect of soil temperature under PM on crop development and growth. Our summary shows that the strength of the warming effect changes with the growth and development of crops, strengthening during the early stage of crop growth and gradually weakening as a crop canopy develops. Generally, the warming effect has a good promotion effect on crop growth, but the crop growth is hampered even with a yield reduction when the increased soil temperature caused by PM exceeds the tolerant temperature for plant growth. Moreover, the compensatory effect of PM could be used to quantify the growth and development of crops under PM and has been widely applied to cotton, corn, winter wheat, and rice. The compensation coefficient is larger in the early stage of crop growth than in the later stage. The compensation coefficient has certain differences for the same crop because of the influence of climate factors, soil moisture content, and soil microtopography. In future research, the theoretical integration of the safety period of PM and the time threshold of the compensatory effect could be theoretically interpreted, and the construction of the compensatory effect module in the crop models will also be an important issue.

Van der Waals Epitaxial Growth of Ultrathin Indium Antimonide on Arbitrary Substrates Through Low-thermal Budget.

III-V semiconductors possess high mobility, high frequency response, and detection sensitivity, making them potentially attractive for beyond-silicon electronics applications. However, the traditional heteroepitaxy of III-V semiconductors is impeded by a significant lattice mismatch and the necessity for extreme vacuum and high temperature conditions due to the low saturated vapor pressures of their constituent metals, thereby impeding their in situ compatibility with flexible substrates and silicon-based circuits. In this study, we present a novel approach to fabricate ultrathin InSb single-crystal nanosheets on arbitrary substrates with a thickness as thin as 2.4nm using low-thermal-budget Van der Waals (vdW) epitaxy through chemical vapor deposition (CVD). In particular, we have successfully achieved in-situ growth on both silicon-based substrates and flexible polyimide substrates. Notably, the growth temperature required for InSb nanosheets (240°C) is significantly lower than that employed in back-end-of-line processes (400°C). The field effect transistor (FET) devices based on fabricated ultrathin InSb nanosheets exhibit ultra-high On-off ratio exceeding 108 and demonstrate minimal gate leakage currents. Furthermore, these ultrathin InSb nanosheet display p-type characteristics with hole mobilities reaching up to 203 cm2v-1s-1 at room temperatures. This study paves the way for achieving heterogeneous integration of III-V semiconductors, ensuring compatibility with existing integrated circuit architecture and facilitating their application in flexible electronics, thereby realizing the potential of III-V nanometer-scale logic transistors. This article is protected by copyright. All rights reserved.

Unveiling Dominant Fungal Pathogens Associated with Root Rot of Hybrid Bermudagrass Based on Culture Dependent and Independent Method.

Hybrid bermudagrass (Cynodon dactylon × C. transvaalensis) is widely used as turf in southern and transition zones of China. From June to September in 2022, an unknown disease was consistently observed on hybrid bermudagrass in different regions of Nanjing, China, that exhibited distinct symptoms of leaf necrosis, severe root rot, and circular or irregular necrotic patches with 20- to 300-cm diameters. In this study, culture-independent and -dependent methods were used to elucidate the dominant fungal pathogens associated with the disease. Basidiomycota and Marasmiellus were shown to be the dominant phyla (51.96 to 70.60%) and genera (50.09 to 69.84%) in the symptomatic samples. A total of 128 fungal strains were isolated from symptomatic root tissues, and 40 strains representing the largest proportion (31.25%) were identified as Marasmiellus mesosporus based on the morphological characteristics, phylogenetic analysis of the ITS and LSU rDNA region, and pathogenicity testing. Temperature sensitivity tests revealed that M. mesosporus grew well at high temperatures (growth rate of 13.74 mm/day at 36°C). To our knowledge, this is the first report of M. mesosporus causing root rot disease on hybrid bermudagrass during hot summer months. The study will have important implications for the management of the disease.

Flavobacterium acetivorans sp. nov. and Flavobacterium galactosidilyticum sp. nov., psychrotolerant flavobacteria isolated from cultivated fish.

Two yellow-coloured strains, F-29T and F-340T, were isolated from fish farms in Antalya and Mugla in 2015 and 2017 during surveillance studies. The 16S rRNA gene sequence analysis showed that both strains belong to the genus Flavobacterium. A polyphasic approach involving a comprehensive genome analysis was employed to ascertain the taxonomic provenance of the strains. The overall genome-relatedness indices of digital DNA-DNA hybridization (dDDH) and average nucleotide identity (ANI) between the strains and the other members of the genus Flavobacterium were found to be well below the established thresholds of 70 and 95 %, respectively. The whole-genome-based phylogenetic analysis revealed that strain F-29T is closely related to Flavobacterium granuli (dDDH 39.3 % and ANI 89.4 %), while strain F-340T has a close relationship with the type strain of Flavobacterium pygoscelis (dDDH 25.6 % and ANI 81.5 %). Both strains were psychrotolerant with an optimum growth temperature of 25 °C. The chemotaxonomic characteristics of the strains were typical of the genus Flavobacterium. Both strains had phosphatidylethanolamine, aminolipids and unidentified lipids in their polar lipid profile and MK-6 as the isoprenoid quinone. The major fatty acids were iso-C15 : 0 and anteiso-C15 : 0. The genome size of the strains was 3.5 Mb, while G+C contents were 35.3 mol% for strain F-29T and 33.4 mol% for strain F-340T. Overall, the characterizations confirmed that both strains are representatives of two novel species within the genus Flavobacterium, for which the names Flavobacterium acetivorans sp. nov. and Flavobacterium galactosidilyticum sp. nov. are proposed, with F-29T (JCM 34193T=KCTC 82253T) and F-340T (JCM 34203T=KCTC 82263T) as the type strains, respectively.

Epitaxial trench refill of 4H-SiC by chlorinated chemistry

Trench epitaxy of 4H-SiC is investigated with the supersaturation of chlorinated chemistry at a growth temperature of 1550 °C. Coupled with a lower growth temperature than has been previously reported, the integrity of the 4H-SiC trenches is retained and minimal rounding effects of H2 annealing prior to growth are observed. The system gives different growth rates of materials on the various crystal faces of the trenches and can be used to improve the refilling process, resulting in the reduced void formation. The addition of excessive levels of HCl can suppress trench epitaxy by reducing the growth rate on the sidewalls of trenches in favor of growth on the surface. The processes demonstrated offer a scalable and reproducible method to fabricate SiC-based superjunction device structures for applications in high voltage power electronics.

Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films

The hardness and fracture toughness of high-temperature wear-resistant transition metal aluminum nitride multilayer films depend largely on the constituting layer's structure, compositional modulation, morphology, and interface coherency. We present a study on 1-micron thick multilayered films consisting of stacked layers of TiN and Zr0.37Al0.63N1.09, each layer being 10 nm thick. The films were grown using ion-assisted reactive magnetron sputtering on MgO(001) and Si(001) at substrate temperatures ranging from ambient to 900°C. By increasing growth temperature, we found that the ZrAlN layers transition from near amorphous to nanocrystalline wurtzite to decomposed c-ZrN and w-AlN domains. Concurrently, the TiN layers exhibit strong fiber texture, polycrystallinity, and epitaxial growth carried by the ZrN domains. Both hardness and fracture stress, evaluated by nanoindentation and micromechanical tests, increase with temperature from H=24 GPaMgO, 23 GPaSi to 36 GPaMgO, 30 GPaSi, and σFSi= 6.1-7.7 GPa, respectively. An improved fracture toughness of KIC=2.4-2.8 MPa√m is related to different toughening mechanisms for the various microstructures. The difference in hardness between the substrates is related to compressive stress due to the deposition conditions and thermal contraction. The superior fracture stress is attributed to dense multilayers, free from macroscopic defects due to ion-assisted growth. After being deposited at 200°C, the multilayers remained thermally stable when vacuum annealed for 15 hours at 900°C, with no significant change in phase composition or hardness. The improved hardness, toughness, and temperature stability of the otherwise brittle nitrides are promising for industrial applications.

Regulation of Dipolar‐Dipolar and Ion‐Dipolar Interactions Simultaneously in Strong Solvating Electrolytes for All‐Temperature Zinc‐Ion Batteries

AbstractAqueous zinc‐ion batteries (AZIBs) attract attention due to their safety and high specific capacity. However, their practical applications are constrained by Zn anode corrosion, dendritic growth, and poor temperature adaptability induced by a strong hydrogen‐bond network in aqueous electrolytes. Herein, a universal strategy to design strong solvating electrolytes is proposed, in which the hydrogen‐bond network and solvation structures are reconstructed by regulating the dipolar‐dipolar and ion‐dipolar interactions simultaneously. Consequently, the hydrogen‐bond network in free water is largely weakened, and the water content in the Zn2+ solvated sheath is reduced, while the hydrogen‐bond network between solvents is strengthened, which effectively broadens the operating temperature range and suppresses Zn dendrites and corrosion. As a result, Zn anodes exhibit excellent platting/stripping efficiency with an average Coulombic Efficiency up to 99.89% after 2000 cycles at 0.5 mA cm−2, impressive cycling stability (5000 h, 0.5 mA cm−2/0.5 mA h cm−2), and a wide operating temperature range of 140 °C (−50–90 °C). Moreover, the Zn//V2O3 full cells also display enhanced temperature‐resistance, implying that the designed strong solvation electrolyte has practical application potential in extreme environments. This study suggests a promising strategy to design ideal electrolytes for high‐performance AZIBs with safety, ultralong cycling life, and satisfying temperature‐resistance.

Genomic and phenotypic characterization of Mycobacterium tuberculosis' closest-related non-tuberculous mycobacteria.

Four species of non-tuberculous mycobacteria (NTM) rated as biosafety level 1 or 2 (BSL-1/BSL-2) organisms and showing higher genomic similarity with Mycobacterium tuberculosis (Mtb) than previous comparator species Mycobacterium kansasii and Mycobacterium marinum were subjected to genomic and phenotypic characterization. These species named Mycobacterium decipiens, Mycobacterium lacus, Mycobacterium riyadhense, and Mycobacterium shinjukuense might represent "missing links" between low-virulent mycobacterial opportunists and the highly virulent obligate pathogen Mtb. We confirmed that M. decipiens is the closest NTM species to Mtb currently known and found that it has an optimal growth temperature of 32°C-35°C and not 37°C. M. decipiens showed resistance to rifampicin, isoniazid, and ethambutol, whereas M. lacus and M. riyadhense showed resistance to isoniazid and ethambutol. M. shinjukuense was sensitive to all three first-line TB drugs, and all four species were sensitive to bedaquiline, a third-generation anti-TB drug. Our results suggest these four NTM may be useful models for the identification and study of new anti-TB molecules, facilitated by their culture under non-BSL-3 conditions as compared to Mtb. M. riyadhense was the most virulent of the four species in cellular and mouse infection models. M. decipiens also multiplied in THP-1 cells at 35°C but was growth impaired at 37°C. Genomic comparisons showed that the espACD locus, essential for the secretion of ESX-1 proteins in Mtb, was present only in M. decipiens, which was able to secrete ESAT-6 and CFP-10, whereas secretion of these antigens varied in the other species, making the four species interesting examples for studying ESX-1 secretion mechanisms.IMPORTANCEIn this work, we investigated recently identified opportunistic mycobacterial pathogens that are genomically more closely related to Mycobacterium tuberculosis (Mtb) than previously used comparator species Mycobacterium kansasii and Mycobacterium marinum. We confirmed that Mycobacterium decipiens is the currently closest known species to the tubercle bacilli, represented by Mycobacterium canettii and Mtb strains. Surprisingly, the reference strain of Mycobacterium riyadhense (DSM 45176), which was purchased as a biosafety level 1 (BSL-1)-rated organism, was the most virulent of the four species in the tested cellular and mouse infection models, suggesting that a BSL-2 rating might be more appropriate for this strain than the current BSL-1 rating. Our work establishes the four NTM species as interesting study models to obtain new insights into the evolutionary mechanisms and phenotypic particularities of mycobacterial pathogens that likely have also impacted the evolution of the key pathogen Mtb.

Effect of Ti content on abnormal grain growth of Fe-Mn-Al-Ni-Ti shape memory alloy

Abstract In this paper, the effects of Ti content on the solvus temperature of γ-phase and abnormal grain growth (AGG) in Fe43.5-xMn34Al15Ni7.5Tix (x = 0, 0.5, 1 and 1.5) shape memory alloys (SMAs) were investigated. It is found that, the increase of Ti content leads to a significant reduction of the solvus temperature of γ-phase, a significant refinement of γ-phase, and a decrease of subgrain size. After 3 times cyclic heat treatments (CHTs), the average grain size of Fe42Mn34Al15Ni7.5Ti1.5 SMA reaches about 9.0 mm, which is about twice of that for Fe42.5Mn34Al15Ni7.5Ti1 SMA. This is attributed to the small subgrains can provide a higher subgrain boundary energy (ΔGs) and grain boundary (GB) migration rate. The subgrain size of Fe42Mn34Al15Ni7.5Ti1.5 SMA (9.7 μm) is significantly smaller than that of Fe42.5Mn34Al15Ni7.5Ti1 SMA (21.3 μm). Thereby, the ΔGs (15.3×10-2 J mol-1) and GB migration rate (11.3×10-6 m s-1) of Fe42Mn34Al15Ni7.5Ti1.5 SMA are significantly higher than those of Fe42.5Mn34Al15Ni7.5Ti1 SMA (7.1×10-2 J mol-1, 6.3×10-6 m s-1). In addition, the maximum superelastic strains of Fe42Mn34Al15Ni7.5Ti1.5 and Fe42.5Mn34Al15Ni7.5Ti1 were 5.3% and 5.1%, respectively. In summary, the addition of 1.5 at.% Ti in Fe-Mn-Al-Ni-Ti SMA can promote the AGG without sacrificing the superelasticity.

Streptococcus hohhotensis sp. nov., isolated from the breast milk of a healthy woman.

Human breast milk contains lactic acid bacteria (LAB), which have an important influence on the composition of the intestinal microbia of infants. In this study, one strain of an α-hemolytic species of the genus Streptococcus, IMAU99199T, isolated from the breast milk of a healthy nursing mother in Hohhot city PR China, was studied to characterise its taxonomic status using phenotypic and molecular taxonomic methods. The results indicated that it represented a member of the mitis-suis clade, pneumoniae subclade of the genus Streptococcus. It is a Gram-stain-positive, catalase-negative and oxidase-negative bacterium, and the cells are globular, paired or arranged in short chains. The results of a phylogenetic analysis of its 16S rRNA gene and two housekeeping genes (gyrB and rpoB) placed it in the genus Streptococcus. A phylogenetic tree based on 135 single-copy genes sequences indicated that IMAU99199T formed a closely related branch well separated from 'Streptococcus humanilactis' IMAU99125, 'Streptococcus bouchesdurhonensis' Marseille Q6994, Streptococcus mitis NCTC 12261T, 'Streptococcus vulneris' DM3B3, Streptococcus toyakuensis TP1632T, Streptococcus pseudopneumoniae ATCC BAA-960T and Streptococcus pneumoniae NCTC 7465T. IMAU99199T and 'S. humanilactis' IMAU99125 had the highest average nucleotide identity (93.7 %) and digital DNA-DNA hybridisation (55.3 %) values, which were below the accepted thresholds for novel species. The DNA G+C content of the draft genome of IMAU99199T was 39.8 %. The main cellular fatty acids components of IMAU99199T were C16 : 0 and C16 : 1ω7. It grew at a temperature range of 25-45 °C (the optimum growth temperature was 37 °C) and a pH range of 5.0-8.0 (the optimum growth pH was 7.0). These data indicate that strain IMAU99199T represents a novel species in the genus Streptococcus, for which the name Streptococcus hohhotensis sp. nov. is proposed. The type strain is IMAU99199T (=GDMCC 1.1874T=KCTC 21155T).

Bi3+/Mn4+ co-doped Y2MgTiO6 dual-emitting phosphors for plant growth lighting and temperature sensor

Novel Bi3+/Mn4+ co-doped Y2MgTiO6 dual-emitting phosphors were synthesized using a high-temperature solid-phase method. The crystal structure and luminescence properties of phosphors were systematically investigated by experimental characterization and theoretical calculation. Under excitation at 375 nm, Y2MgTiO6:Bi3+, Mn4+ phosphors exhibit two emission bands located at 410 nm and 696 nm (blue and red), which can well be matched with the absorption bands of chlorophylls a, b and phytochrome. The Y2MgTiO6: Bi3+, Mn4+ luminescence remains at 66.2 % intensity at 423 K and quantum yield is 52.06 %. Optical temperature properties of Y2MgTiO6:Bi3+, Mn4+ were investigated using fluorescence intensity ratio (FIR) analysis and were found to reach a maximum relative sensitivity of 2.93 % K−1 at 498 K. The study suggests that this material could be a potential option for indoor plant culture and optical temperature sensing.

Variation in the strength and stationarity of southern longleaf pine seasonwood climate-growth relationships

Climate change is predicted to cause asymmetric warming and increased precipitation variability across different seasons. These changes and their effects may be captured in subannual seasonwood measures of tree growth (i.e., earlywood, latewood). Longleaf pine is a foundational tree species throughout the broad southeastern U.S. Its latewood growth may be more variable and sensitive to climate change than earlywood, but prior studies have geographical and ecological sampling limitations. Here, we use dendroecological methods to develop ring-width and seasonwood (earlywood, latewood, and adjusted latewood) chronologies and analyze climate-growth relationships for longleaf pine from eight sites in the Southern Coastal Plain of Florida, USA. Sites spanned a range of environmental conditions to generate an ecologically representative dataset. We evaluated chronology strength and variability and determined monthly and seasonal correlations with precipitation and temperature. We furthermore evaluated climate-growth stationarity using a moving response function and bootstrapped transfer function stability tests. We found adjusted latewood chronologies were most climatically sensitive although totalwood chronologies had higher interseries correlations. Totalwood measurements were more variable than early- or latewood year to year. Tree growth was positively correlated with summer precipitation at six out of eight sites and negatively correlated with late summer maximum temperatures at six out of eight sites. Negative relationships between growth and maximum temperature occurred earlier in the year at southern sites and the positive effect of June precipitation on tree growth was notable, found at six out of eight sites. However, the strength and significance of climate-growth relationships were non-stationary through space and time, with shifts largely occurring post-1950s. Longleaf pine at its southern range extent was less sensitive to climate than more northern populations, which may indicate non-linear responses to warming captured at the species’ range margin. Our results highlight dynamic climate-growth relationships related to the broad range of environmental conditions where longleaf pine is found.

Pit-formation in germanium homoepitaxial layers

With increasing importance of germanium (Ge) for semiconductor quantum technologies, the necessity of growing defect-free Ge films has become crucial. Here, Ge homoepitaxial growth experiments were conducted using molecular beam epitaxy (MBE). This requires a smooth (σrms≤10 Å) and contamination-free substrate surface. We have shown that common ex-situ wet chemical cleaning methods are not sufficient. Foreign atoms like carbon stick to the substrate surface and tend to form clusters which results in macroscopic growth defects which are referred here as pits. The density of such pits is in the range of 106 to 109 cm−2. The formation and characteristics of the pits have been investigated. Pits emerge after a growth at 370 °C with a thickness of above 5 nm . At growth temperatures lower than 300 °C, the density of pits increases, while it decreases at temperatures higher than 400 °C. Pits can be faceted with the main facets being {1 1 3} and {3 15 23}.Furthermore, a procedure is presented involving a Ge buffer growth at room temperature with a high growth rate (0.02 nm/s). This leads to a coverage of present contamination and the formation of a new substrate surface which prevent pit formation.

High-performance infrared photodetector based on InAs/GaAs submonolayer quantum dots grown at high temperature with a (2×4) surface reconstruction

We studied the impact of surface reconstruction on the performance of infrared photodetectors containing InAs/GaAs submonolayer quantum dots (SMLQDs) grown by molecular beam epitaxy. Adjusting the substrate temperature before InAs deposition allowed us to move between the conventional c(4×4) reconstruction of the GaAs(001) surface, observed at low growth temperatures, and the (2×4) reconstruction which can only be stabilized at higher sample temperatures than those commonly used to deposit InAs. Photodetectors based on SMLQDs grown on such a (2×4) surface reconstruction outperformed those grown on a c(4×4) reconstruction and provided specific detectivities as high as 8.3×1011cm Hz1/2 W-1 at 12K. This increase in performance is due to the nucleation of true two-dimensional InAs islands which are the building blocks of SMLQDs and can only form on a (2×4)-reconstructed GaAs(001) surface.

Assessing Substrate Utilization and Bioconversion Efficiency of Black Soldier Fly (Hermetia illucens) Larvae: Effect of Diet Composition on Growth and Development Temperature.

Black soldier fly larvae (BSFL) can utilize food by-products or residues for growth, benefiting farm animal's diets' production sustainability. The experiment aimed to assess the effect of different substrate compositions on larval growth, chemical composition, and substrate temperature. BSFL were allocated to one of the four diets (control, vegetable, carnivorous, and omnivorous) for the entire experiment (8 days). The temperature was measured twice daily using a thermal-imaging camera, and the accumulated degree hours (ADH) was calculated. The results showed that the larvae fed the vegetable diet exhibited a significantly reduced growth performance, with a biomass reduction of 26.3% compared to the control diet; furthermore, vegetable-fed larvae showed a lower dry matter content (-30% compared to the average of other diets) due to lower fat content (-65% compared to average of other diets). The nutritional composition of larvae fed an omnivorous diet was similar to larvae fed a high-quality substrate diet (control diet-chicken feed), indicating that the omnivorous diet could be an ideal solution for rearing BSFL larvae; however, the current European legislation prohibits the use of animal meal. The study also revealed that substrate temperatures did not have a discernible influence on larval growth, further emphasizing the importance of diet in BSFL rearing strategies.

Impact of Residual Compositional Inhomogeneities on the MCT Material Properties for IR Detectors.

HgCdTe is a well-known material for state-of-the-art infrared photodetectors. The interd-iffused multilayer process (IMP) is used for Metal-Organic Chemical Vapor Deposition (MOCVD) of HgCdTe heterostructures, enabling precise control of composition. In this method, alternating HgTe and CdTe layers are deposited, and they homogenize during growth due to interdiffusion, resulting in a near-uniform material. However, the relatively low (350 °C) IMP MOCVD growth temperature may result in significant residual compositional inhomogeneities. In this work, we have investigated the residual inhomogeneities in the IMP-grown HgCdTe layers and their influence on material properties. Significant IMP growth-related oscillations of composition have been revealed in as-grown epilayers with the use of a high-resolution Secondary Ion Mass Spectroscopy (SIMS). The oscillations can be minimized with post-growth annealing of the layers at a temperature exceeding that of growth. The electric and photoelectric characterizations showed a significant reduction in the background doping and an increase in the recombination time, which resulted in dramatic improvement of the spectral responsivity of photoconductors.